This article is about where the gas meter is located in apartments and how to read it.
Gas is used in strata common property generally for heating hot water, although some blocks also have common gas BBQ facilities.
GET NOTIFIED WHEN WE PUBLISH NEW Q&As, NEWS AND ARTICLES TO THE SITE
Some units also have gas bills for heating and cooking. If you do have gas, it is good to know where your gas meter is located in your apartment so you can check the reading against the bill.
Where is the Gas Meter Located in Your Apartment?
Some places the gas meter may be located is in a service riser, in the ceiling, garbage room or in a plant room. Some examples of what you are looking for:
How to Read the Gas Meter in Your Apartment
Once you’ve located your gas meter, you now need to know how to read it. Newer buildings may also contain an MDL. These are remote reading units for all the meters (common area and apartments). The remote reading units send the gas usage on a weekly basis to the gas companies.
Your meter, the MDL, and the gas company should all be reading the same usage on the same day. (Just to make it confusing some meters show one or two decimal places and the remote reading unit doesn’t.)
What if the readings don’t match or your bill comes out with an “Estimate” rather than “Actual” reading type?
Gas leaks are rare, so other explanations are:
- A fault with the meter itself (most likely)
- A fault in the line/MDL remotely reading the meter
- The meter number being read is wrong ie not the meter for your unit.
Jemena (the people who own the gas meters) can check from their office if they are reading the meter at their end, so it is easy to eliminate faults with the line/MDL as the source of the problem. As is checking the correct meter number is assigned to the correct unit or common property which Jemena or your gas company can do. If your bill shows “Estimate” instead of “Actual” read type then it is very likely there is a problem with the meter and the meter may need replacing.
Please note: Jemena is NSW only, in WA you would be dealing with ATCO Gas Australia and there are different suppliers in each state. If you are unsure who owns your meter, just check your gas bill.
Read next:
Have a question or something to add to the article? Leave a comment below.
EmbedAbout the Author:
Catherine Lezer is a dynamic businesswoman with a record of success; postgraduate qualified she was elected to the SCA NSW Board in 2015 for a period of 2 years. Owning in strata property for many years, she has been volunteering on various executive committees for 15 years. Currently, Catherine chairs two of the buildings where she owns property. Always seeking to be involved in her community she has been actively dealing with legal matters, interior, lift and exterior upgrades, defects and a multitude of day-to-day strata matters.
Interested in more information about gas meters how to read, posts about apartment living or strata legislation particular to your state? Visit Maintenance and Common Property OR Strata Information Pages by State
After a free PDF of this article? Log into your existing LookUpStrata Account to download the printable file. Not a member? Simple – join for free on our Registration page.